XP STOP ERROR Error Code: 0x0000008e
How to Fix XP STOP ERROR Error Code: 0x0000008e
Tech Advise:1
↣ To remove this problem follow these steps:
↣ Remove some of the memory modules that are installed on the computer.
↣ Leave at least the RAM that is required for the computer to start & run Windows XP.
↣ The recommended RAM to run Windows XP is 128 megabytes MB.
↣ The minimum is 64 MB & the maximum is 4 gigabytes.
↣ For example if two 256-MB memory modules are installed on your computer remove one of the memory modules.
↣ Restart your computer & then run the Setup program:
↣ Insert the Windows XP Setup CD-ROM in the CD-ROM drive >> start the computer >> then click OK to select the first option screen to install a copy of Windows XP.
↣ Click Accept >> then follow the instructions on the screen to complete the Windows XP installation.
↣ If you again receive the error message that is mentioned in the Symptoms section go to
↣ Remove a different memory module, or install the RAM in a different memory slot.
↣ Restart your computer >> & then rerun Setup.
↣ You may have to restart your computer several times to identify the specific memory modules that are not working correctly.
Tech Advise:2
↣ The proper problem diagnostic is minidump investigation.
↣ The crash may be caused by faulty ram or device driver error.
↣ When Windows crashes with blue screen
↣ It writes a system event 1001 or 1003 & a minidump to the folder \windows\minidump.
↣ Check system event 1001 & 1003 & it has the content of the blue screen.
↣ Event ID: 1001
↣ Source: Save Dump
↣ Description:
↣ The computer has rebooted from a bugcheck.The bugcheck was : 0xc000000a (0xe1270188, 0x00000002, 0x00000000, 0x804032100).
↣ Microsoft Windows….. A dump was saved in: …….
↣ Event Source: System Error
↣ Event Category: 102
↣ Event ID: 1003
↣ Description:
↣ Error code 1000007f, parameter1 0000000d, parameter2 00000000, parameter3 00000000, parameter4 00000000
↣ Click On Start >> Control Panel >> Adminstrative Tools >> Event Viewer >> System >> Event 1001/1003.
↣ Copy the content & paste it back here
↣ Zip 5 to 6 minidumps to a zip file & attach it at any webspace.
↣ I will study the dump & find out the culprit.
Tech Advise:3
↣ Check for updated driver for broadb& adapter because this could be adriver issue.
↣ Device manager might hold a clue.
CAUSE:
↣ One or more of the random access memory RAM modules that are installed on your computer are faulty.
↣ The RAM configuration is incompatible with Windows XP.
↣ This issue is caused by a code problem in GDI the graphics device interface for Windows XP
Topics, Files and Tools to Clean Related XP STOP Error 0x0000008e
↣ Xp stop error 7e
↣ xp stop error 0x0000008e problem
↣ bugcheck 8e
↣ how to clear xp error 0x0000008e